{"id":1697,"date":"2026-08-18T04:09:56","date_gmt":"2026-08-18T04:09:56","guid":{"rendered":"https:\/\/www.thepipingmart.com\/blog\/?p=1697"},"modified":"2026-08-18T04:09:56","modified_gmt":"2026-08-18T04:09:56","slug":"abrasion-resistant-steel-grades-list","status":"publish","type":"post","link":"https:\/\/www.thepipingmart.com\/blog\/abrasion-resistant-steel-grades-list\/","title":{"rendered":"Abrasion-Resistant Steel Grades List"},"content":{"rendered":"\n<p class=\"wp-block-paragraph\">Abrasion-resistant (AR) steel is used across mining, construction, manufacturing, and heavy equipment industries where standard steel wears out too quickly. The grades range from AR200 at the softer end to AR600 at the hardest, with each number referring approximately to the Brinell hardness of the material. AR400 is the most widely used grade, while AR500 and AR600 are reserved for more extreme conditions. This guide covers a wide range of AR steel grades, what distinguishes them, and the key factors that should guide grade selection.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>What is Abrasion-Resistant Steel?<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><a href=\"https:\/\/www.thepipingmart.com\/material\/abrasion-resistant\">Abrasion-resistant steel<\/a> is a <strong>high-carbon steel <\/strong>that has been hardened during production to resist wear caused by friction, sliding contact, and impact. The<strong> hardness is measured in Brinell Hardness (HBW), <\/strong>and the grade number corresponds roughly to that value. Its strength and wear resistance are achieved by adding elements like carbon, manganese, chromium, molybdenum, and boron, then heat treating the steel by quenching and tempering it. This type of steel is often used in bucket liners, chutes, conveyor systems, crusher parts, and truck bodies, where long wear life is critical to keeping operating costs down.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Different Types of AR Steel Grades<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">AR (abrasion-resistant) steel is a type of high-carbon steel made to handle heavy wear, scratching, and impact in tough working conditions. The number in each AR grade (such as 200, 400, and 500) refers to the steel&#8217;s Brinell Hardness (HBW), which indicates how hard and wear-resistant it is: higher values indicate harder, more wear-resistant steel.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>AR200<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>AR200 is a basic abrasion-resistant steel plate<\/strong> used for moderate wear. It is the softest and easiest-to-work-with grade in the AR steel family, sometimes called a mild abrasion-resistant steel.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Brinell hardness: <\/strong>180\u2013220 HBW<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Chemical composition:<\/strong> low carbon (0.10\u20130.20%), with small amounts of manganese, silicon, and trace alloys<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Tensile strength: <\/strong>approximately 690\u2013790 MPa<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Offers good formability and weldability compared to higher AR grades<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Suited for light-wear applications where moderate abrasion resistance is needed without fabrication difficulty<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Common uses: <\/strong>\u00a0AR200 is commonly used in truck liners, agricultural equipment, and general structural components<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>AR400<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>AR400 is a stronger, quenched-and-tempered abrasion-resistant steel plate<\/strong> for moderate to heavy wear. It is one of the most widely used AR grades and is often treated as the standard option for abrasion-resistant steel.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Brinell hardness:<\/strong> 360\u2013440 HBW<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Chemical composition: <\/strong>carbon (0.15\u20130.30%) and manganese (0.60\u20131.50%), with small additions of chromium, molybdenum, and boron<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Tensile strength:<\/strong> approximately 1200\u20131400 MPa<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Balances hardness and workability well, with reasonable toughness for field applications<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Suitable for applications involving consistent sliding or impact wear<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Common uses: <\/strong><a href=\"https:\/\/www.thepipingmart.com\/grade\/abrasion-resistant-hardox-400\">AR400<\/a> is commonly used in mining equipment, dump truck bodies, chutes, hoppers, and earth-moving machinery<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>AR450<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>AR450 is a quenched and tempered, high-strength abrasion-resistant steel plate <\/strong>designed for applications requiring greater wear resistance than AR400 without the fabrication constraints of AR500. It is sometimes referred to as medium-high abrasion-resistant steel.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Brinell hardness:<\/strong> 425\u2013475 HBW<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Chemical composition:<\/strong> carbon (0.20\u20130.32%), with increased levels of chromium and molybdenum for better through-hardening<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Tensile strength:<\/strong> approximately 1400\u20131550 MPa<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Retains usable toughness for structural wear parts while offering improved wear life over AR400<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Suited for applications where AR400 wears too quickly, but AR500 would create unnecessary fabrication difficulty.<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Common uses:<\/strong> <a href=\"https:\/\/www.thepipingmart.com\/grade\/abrasion-resistant-hardox-450\">AR450<\/a> is commonly used in bucket liners, conveyor wear plates, and crusher liners<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>AR500<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>AR500 is a high-strength, quenched and tempered abrasion-resistant steel plate <\/strong>designed for heavy wear and high-impact environments. It is often referred to as high abrasion-resistant steel and sees widespread use across industrial and speciality applications.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Brinell hardness:<\/strong> 470\u2013530 HBW<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Chemical composition:<\/strong> carbon (0.25\u20130.35%), with significant additions of chromium, molybdenum, and boron<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Tensile strength: <\/strong>approximately 1600\u20131800 MPa<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Ductility is reduced at this hardness level; welding and cold forming require more care than with lower grades.<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Suited for high-impact, heavy-wear environments where longer service life justifies additional fabrication requirements<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Common uses: <\/strong><a href=\"https:\/\/www.thepipingmart.com\/grade\/abrasion-resistant-hardox-500\">AR500<\/a> is commonly used in heavy-duty mining equipment, armour plating, shooting targets, bulldozer components, and high-impact wear liners<\/li>\n<\/ul>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>AR600<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>AR600 is an ultra-high-strength, quenched and tempered abrasion-resistant steel plate <\/strong>designed for extreme wear conditions where wear life is the primary concern. It is the hardest standard grade in the AR steel family, sometimes referred to as ultra-high abrasion-resistant steel.<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Brinell hardness:<\/strong> 570\u2013640 HBW<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Chemical composition: <\/strong>carbon (up to 0.40% or higher), with elevated levels of chromium, molybdenum, and boron<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Tensile strength:<\/strong> exceeds 2000 MPa<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li>More brittle than lower grades; not recommended for impact-heavy applications without careful engineering review<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li>Cold forming is not practical; welding requires strict pre- and post-heat procedures.<\/li>\n<\/ul>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Common uses:<\/strong> AR600 is commonly used in crusher parts, cement industry liners, dredging components, and extreme-wear environments where impact loads are controlled<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Important Factors to Consider When Choosing AR Steel Grades<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Choosing the right AR steel grade is not just about picking the hardest option available. The right choice depends on<strong> several practical factors that affect both performance and cost over time.<\/strong><\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Abrasion Resistance<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">This is usually the starting point. The higher the Brinell hardness, the better the steel holds up against sliding wear and surface erosion. If the application involves continuous contact with abrasive material, sand, ore, or gravel, then a harder grade like AR500 or AR600 makes sense. For lighter wear, AR400 is often sufficient and easier to work with.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Impact Resistance<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Hardness and toughness do not always go together. Harder grades like AR600 are more brittle, so repeated impact loads can cause cracking rather than just surface wear. AR400 and AR450 handle impact better because they retain more toughness. If the equipment faces both abrasion and impact, like a crusher or a bucket, the grade selection needs to account for both, not just one.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Weldability and Fabrication<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Higher grades are harder to weld and form. AR400 can be welded with standard procedures and some care. AR500 and above require preheating, controlled interpass temperatures, and compatible filler materials. Cold forming becomes increasingly limited as hardness goes up. AR600 is essentially not cold-formable. If the part has complex shapes or site welding requirements, a lower grade may be the more practical choice even if it wears faster.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Strength Requirements<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">AR steel is mainly selected for its resistance to wear, but tensile and yield strength are still important for structural parts that carry loads. For example, AR500 has a tensile strength above 1600 MPa, which matters for load\u2011bearing components such as boom arms or structural liners. In most cases, the hardness and strength go up together across grades, so this factor usually aligns with the abrasion requirement, but it is worth checking when the part carries a load.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Corrosion Resistance<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Standard AR steel grades do not have inherent corrosion resistance. They will rust in wet or humid conditions without surface protection. In marine, chemical, or outdoor environments, a coating, paint system, or galvanising is needed regardless of the grade chosen. If corrosion is a major concern alongside wear, some applications combine AR steel with protective liners or coatings rather than switching to a stainless or corrosion-resistant alloy entirely.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Temperature Resistance<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">AR steel grades are heat-treated to achieve their hardness, and that hardness can be reduced at elevated temperatures. Prolonged exposure above roughly<strong> 150\u2013200\u00b0C <\/strong>can begin to affect the tempered microstructure and reduce the surface hardness over time. For applications near furnaces, kilns, or high-temperature processes, the operating temperature should be confirmed against the steel&#8217;s tempering temperature before specifying a grade.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Cost-effectiveness<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The cost of higher grades is higher per tonne, as they also increase the cost of fabrication due to the stringent welding and forming requirements. Instead of just comparing material prices, it\u2019s better to compare wear life against replacement cost. In some cases, using AR450 instead of AR400 can roughly double the wear life for only a small increase in price, which cuts downtime and how often parts need to be replaced. A cheaper grade that must be replaced twice as often is rarely the most economical choice, while a grade that is harder than necessary and difficult to fabricate can add extra costs.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>Conclusion<\/strong><\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">AR steel grades cover a broad range of hardness and performance levels, from the relatively workable AR200 to the extremely hard AR600. Each grade has a specific range of applications, and selecting the right one requires an honest assessment of the wear conditions, impact loads, fabrication requirements, and service environment. In most standard wear applications, AR400 remains the practical choice. Harder grades offer longer wear life but come with real trade-offs in toughness and fabrication complexity. Getting the grade selection right from the start reduces replacement frequency, lowers operating costs, and avoids premature component failure. If the application has mixed conditions, abrasion alongside impact or elevated temperature, it is worth reviewing the grade selection carefully before committing to a material.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\"><strong>FAQs<\/strong><\/h2>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>What are the different types of abrasion-resistant steel?<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">The main AR steel grades are AR200, AR400, AR450, AR500, and AR600. Each grade is identified for its approximate Brinell hardness value. AR400 is the most common general-purpose grade. AR500 and AR600 are chosen for harsher wear conditions.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>What is the difference between AR400 and AR500 steel?<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">AR400 has a Brinell hardness of 360-440 HBW, and AR500 ranges from 470 to 530 HBW. Although AR500 is less durable and more difficult to weld and cold shape than AR400, it is more resistant to wear. For applications that need both impact and abrasion, AR400 is a more reasonable option.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>What grade of steel is AR500?<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">AR500 is a quenched and tempered, high-carbon abrasion-resistant steel with a Brinell hardness of approximately 470\u2013530 HBW and a tensile strength exceeding 1600 MPa. It contains carbon, chromium, molybdenum, and boron in its composition and is used in heavy wear and ballistic applications.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>Is AR400 stronger than AR500?<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">AR500 has higher tensile strength and hardness than AR400. However, AR400 has better toughness and impact resistance because it is less brittle. In terms of wear resistance, AR500 outperforms AR400. AR400 outperforms other materials in terms of impact load resistance.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\"><strong>What is a good abrasion-resistant steel?<\/strong><\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">AR400 is a reliable choice for most general wear applications; it balances hardness, toughness, and fabricability well. AR450 or AR500 is ideal for extreme wear conditions. The best grade is determined by certain parameters such as abrasion conditions, impact presence, operating temperature, and fabrication requirements.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>Abrasion-resistant (AR) steel is used across mining, construction, manufacturing, and heavy equipment industries where standard steel wears out too quickly. The grades range from AR200 at the softer end to AR600 at the hardest, with each number referring approximately to the Brinell hardness of the material. AR400 is the most widely used grade, while AR500 [&hellip;]<\/p>\n","protected":false},"author":1,"featured_media":1698,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[167],"tags":[175],"class_list":["post-1697","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-abrasion-resistant","tag-abrasion-resistant-steel-grades"],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v27.5 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Abrasion-Resistant Steel Grades List &amp; Guide<\/title>\n<meta name=\"description\" content=\"Explore abrasion-resistant steel grades, their properties, and uses. Find the right AR steel grade for durability and wear resistance.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.thepipingmart.com\/blog\/abrasion-resistant-steel-grades-list\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Abrasion-Resistant Steel Grades List &amp; Guide\" \/>\n<meta property=\"og:description\" content=\"Explore abrasion-resistant steel grades, their properties, and uses. Find the right AR steel grade for durability and wear resistance.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.thepipingmart.com\/blog\/abrasion-resistant-steel-grades-list\/\" \/>\n<meta property=\"og:site_name\" content=\"PipingMart Blog\" \/>\n<meta property=\"article:published_time\" content=\"2026-08-18T04:09:56+00:00\" \/>\n<meta property=\"og:image\" content=\"http:\/\/www.thepipingmart.com\/blog\/wp-content\/uploads\/2026\/08\/Abrasion-resistant-steel-grades-1024x683.png\" \/>\n\t<meta property=\"og:image:width\" content=\"1024\" \/>\n\t<meta property=\"og:image:height\" content=\"683\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/png\" \/>\n<meta name=\"author\" content=\"admin\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Manish Doshi\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"8 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/abrasion-resistant-steel-grades-list\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/abrasion-resistant-steel-grades-list\\\/\"},\"author\":{\"name\":\"admin\",\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/#\\\/schema\\\/person\\\/3fabb89b55a17927c3aaa0580d5b296e\"},\"headline\":\"Abrasion-Resistant Steel Grades List\",\"datePublished\":\"2026-08-18T04:09:56+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/abrasion-resistant-steel-grades-list\\\/\"},\"wordCount\":1666,\"publisher\":{\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/abrasion-resistant-steel-grades-list\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/08\\\/Abrasion-resistant-steel-grades.png\",\"keywords\":[\"Abrasion-Resistant Steel Grades\"],\"articleSection\":[\"abrasion resistant\"],\"inLanguage\":\"en-US\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/abrasion-resistant-steel-grades-list\\\/\",\"url\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/abrasion-resistant-steel-grades-list\\\/\",\"name\":\"Abrasion-Resistant Steel Grades List & Guide\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/abrasion-resistant-steel-grades-list\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/abrasion-resistant-steel-grades-list\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/08\\\/Abrasion-resistant-steel-grades.png\",\"datePublished\":\"2026-08-18T04:09:56+00:00\",\"description\":\"Explore abrasion-resistant steel grades, their properties, and uses. Find the right AR steel grade for durability and wear resistance.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/abrasion-resistant-steel-grades-list\\\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/abrasion-resistant-steel-grades-list\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/abrasion-resistant-steel-grades-list\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/08\\\/Abrasion-resistant-steel-grades.png\",\"contentUrl\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/wp-content\\\/uploads\\\/2026\\\/08\\\/Abrasion-resistant-steel-grades.png\",\"width\":1536,\"height\":1024,\"caption\":\"Abrasion-resistant steel grades\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/abrasion-resistant-steel-grades-list\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Abrasion-Resistant Steel Grades List\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/\",\"name\":\"PipingMart Blog\",\"description\":\"\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/#organization\",\"name\":\"PipingMart Blog\",\"url\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"\",\"contentUrl\":\"\",\"caption\":\"PipingMart Blog\"},\"image\":{\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/#\\\/schema\\\/person\\\/3fabb89b55a17927c3aaa0580d5b296e\",\"name\":\"admin\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/b8d8dca141724482bdd6576d05b408aa3e2d9ac11e25006c7801f6ad5008528f?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/b8d8dca141724482bdd6576d05b408aa3e2d9ac11e25006c7801f6ad5008528f?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/b8d8dca141724482bdd6576d05b408aa3e2d9ac11e25006c7801f6ad5008528f?s=96&d=mm&r=g\",\"caption\":\"admin\"},\"sameAs\":[\"http:\\\/\\\/www.thepipingmart.com\\\/blog\"],\"url\":\"https:\\\/\\\/www.thepipingmart.com\\\/blog\\\/author\\\/manish-doshi\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Abrasion-Resistant Steel Grades List & Guide","description":"Explore abrasion-resistant steel grades, their properties, and uses. Find the right AR steel grade for durability and wear resistance.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.thepipingmart.com\/blog\/abrasion-resistant-steel-grades-list\/","og_locale":"en_US","og_type":"article","og_title":"Abrasion-Resistant Steel Grades List & Guide","og_description":"Explore abrasion-resistant steel grades, their properties, and uses. Find the right AR steel grade for durability and wear resistance.","og_url":"https:\/\/www.thepipingmart.com\/blog\/abrasion-resistant-steel-grades-list\/","og_site_name":"PipingMart Blog","article_published_time":"2026-08-18T04:09:56+00:00","og_image":[{"width":1024,"height":683,"url":"http:\/\/www.thepipingmart.com\/blog\/wp-content\/uploads\/2026\/08\/Abrasion-resistant-steel-grades-1024x683.png","type":"image\/png"}],"author":"admin","twitter_card":"summary_large_image","twitter_misc":{"Written by":"Manish Doshi","Est. reading time":"8 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.thepipingmart.com\/blog\/abrasion-resistant-steel-grades-list\/#article","isPartOf":{"@id":"https:\/\/www.thepipingmart.com\/blog\/abrasion-resistant-steel-grades-list\/"},"author":{"name":"admin","@id":"https:\/\/www.thepipingmart.com\/blog\/#\/schema\/person\/3fabb89b55a17927c3aaa0580d5b296e"},"headline":"Abrasion-Resistant Steel Grades List","datePublished":"2026-08-18T04:09:56+00:00","mainEntityOfPage":{"@id":"https:\/\/www.thepipingmart.com\/blog\/abrasion-resistant-steel-grades-list\/"},"wordCount":1666,"publisher":{"@id":"https:\/\/www.thepipingmart.com\/blog\/#organization"},"image":{"@id":"https:\/\/www.thepipingmart.com\/blog\/abrasion-resistant-steel-grades-list\/#primaryimage"},"thumbnailUrl":"https:\/\/www.thepipingmart.com\/blog\/wp-content\/uploads\/2026\/08\/Abrasion-resistant-steel-grades.png","keywords":["Abrasion-Resistant Steel Grades"],"articleSection":["abrasion resistant"],"inLanguage":"en-US"},{"@type":"WebPage","@id":"https:\/\/www.thepipingmart.com\/blog\/abrasion-resistant-steel-grades-list\/","url":"https:\/\/www.thepipingmart.com\/blog\/abrasion-resistant-steel-grades-list\/","name":"Abrasion-Resistant Steel Grades List & Guide","isPartOf":{"@id":"https:\/\/www.thepipingmart.com\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.thepipingmart.com\/blog\/abrasion-resistant-steel-grades-list\/#primaryimage"},"image":{"@id":"https:\/\/www.thepipingmart.com\/blog\/abrasion-resistant-steel-grades-list\/#primaryimage"},"thumbnailUrl":"https:\/\/www.thepipingmart.com\/blog\/wp-content\/uploads\/2026\/08\/Abrasion-resistant-steel-grades.png","datePublished":"2026-08-18T04:09:56+00:00","description":"Explore abrasion-resistant steel grades, their properties, and uses. Find the right AR steel grade for durability and wear resistance.","breadcrumb":{"@id":"https:\/\/www.thepipingmart.com\/blog\/abrasion-resistant-steel-grades-list\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.thepipingmart.com\/blog\/abrasion-resistant-steel-grades-list\/"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.thepipingmart.com\/blog\/abrasion-resistant-steel-grades-list\/#primaryimage","url":"https:\/\/www.thepipingmart.com\/blog\/wp-content\/uploads\/2026\/08\/Abrasion-resistant-steel-grades.png","contentUrl":"https:\/\/www.thepipingmart.com\/blog\/wp-content\/uploads\/2026\/08\/Abrasion-resistant-steel-grades.png","width":1536,"height":1024,"caption":"Abrasion-resistant steel grades"},{"@type":"BreadcrumbList","@id":"https:\/\/www.thepipingmart.com\/blog\/abrasion-resistant-steel-grades-list\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.thepipingmart.com\/blog\/"},{"@type":"ListItem","position":2,"name":"Abrasion-Resistant Steel Grades List"}]},{"@type":"WebSite","@id":"https:\/\/www.thepipingmart.com\/blog\/#website","url":"https:\/\/www.thepipingmart.com\/blog\/","name":"PipingMart Blog","description":"","publisher":{"@id":"https:\/\/www.thepipingmart.com\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.thepipingmart.com\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.thepipingmart.com\/blog\/#organization","name":"PipingMart Blog","url":"https:\/\/www.thepipingmart.com\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.thepipingmart.com\/blog\/#\/schema\/logo\/image\/","url":"","contentUrl":"","caption":"PipingMart Blog"},"image":{"@id":"https:\/\/www.thepipingmart.com\/blog\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.thepipingmart.com\/blog\/#\/schema\/person\/3fabb89b55a17927c3aaa0580d5b296e","name":"admin","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/b8d8dca141724482bdd6576d05b408aa3e2d9ac11e25006c7801f6ad5008528f?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/b8d8dca141724482bdd6576d05b408aa3e2d9ac11e25006c7801f6ad5008528f?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/b8d8dca141724482bdd6576d05b408aa3e2d9ac11e25006c7801f6ad5008528f?s=96&d=mm&r=g","caption":"admin"},"sameAs":["http:\/\/www.thepipingmart.com\/blog"],"url":"https:\/\/www.thepipingmart.com\/blog\/author\/manish-doshi\/"}]}},"_links":{"self":[{"href":"https:\/\/www.thepipingmart.com\/blog\/wp-json\/wp\/v2\/posts\/1697","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.thepipingmart.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.thepipingmart.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.thepipingmart.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.thepipingmart.com\/blog\/wp-json\/wp\/v2\/comments?post=1697"}],"version-history":[{"count":1,"href":"https:\/\/www.thepipingmart.com\/blog\/wp-json\/wp\/v2\/posts\/1697\/revisions"}],"predecessor-version":[{"id":1699,"href":"https:\/\/www.thepipingmart.com\/blog\/wp-json\/wp\/v2\/posts\/1697\/revisions\/1699"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.thepipingmart.com\/blog\/wp-json\/wp\/v2\/media\/1698"}],"wp:attachment":[{"href":"https:\/\/www.thepipingmart.com\/blog\/wp-json\/wp\/v2\/media?parent=1697"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.thepipingmart.com\/blog\/wp-json\/wp\/v2\/categories?post=1697"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.thepipingmart.com\/blog\/wp-json\/wp\/v2\/tags?post=1697"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}