Get A Quote

bottomNavHome

Home

navProfile

Account

bottomNavGetAQuote

Get A Quote

About Us

Contact Us

Connect with us

blackFacebookblackTwitterblackLinkedInblackInstagram
Inconel 725 Washer

Inconel 725 Washer

Inconel 725 washers are specialist fasteners manufactured using a nickel-chromium washer that has high corrosion and strength characteristics. These washers do not degrade mechanically at high temperatures and can therefore withstand a range of applications.

Chemical Compositions Of Inconel 725 Washer

The chemical composition of Inconel 725 is crucial for comprehending its outstanding properties and suitability for various high-stress applications.

ElementsContent (%)
Nickel, Ni55 - 59
Chromium, Cr19 - 22.5
Iron, Fe9
Molybdenum, Mo7 - 9.50
Niobium, Nb (Columbium, Cb)2.75 - 4
Titanium, Ti1 - 1.70
Aluminum, Al 0.35
Manganese, Mn 0.35
Silicon, Si 0.20
Carbon, C 0.030
Phosphorous, P 0.015
Sulfur, S 0.010

Hence, The chemical composition of Inconel 725 washers highlights their robustness and versatility in challenging environments.

Mechanical Properties Of Inconel 725 Washer

The mechanical properties of Inconel 725 washers help in appreciating their performance capabilities and their suitability for high-stress applications.

PropertiesMetricImperial
Tensile strength855 MPa124000 psi
Yield strength (@0.2%)427 MPa62000 psi
Modulus of elasticity204 GPa29600 ksi
Poissons ratio0.310.31
Elongation at break57%57%
Hardness, Rockwell C55

Hence, The mechanical properties of Inconel 725 washers underscore their exceptional performance in challenging conditions.

Advantages of Inconel 725 Washer

Below are the qualities of Inconel 725 washers that may aid in understanding their value and choosing the appropriate material for a high-stress regime.

  • Superior Strength: These washers possess high tensile and yield strength to allow them to undertake large loads and stresses without experiencing deformation.
  • Excellent Fatigue Resistance: Inconel 725 washers are specifically manufactured for use under cyclic load carrying capacity and hence ideal for use where the product is likely to be subjected to cyclic loads.
  • Resistance to Stress-Corrosion Cracking: Stress corrosion cracking, which is an important consideration for reliability in high-stress environments, is well resisted by Inconel 725.
  • Thermal Stability: Inconel 725 washers are also resistant to various climates since they do not lose their mechanical properties even when exposed to high or low temperatures.
  • Oxidation Resistance: These washers do not corrode at high temperatures, thus being ideal where high temperatures are expected as per the application requirements.
  • Ease of Fabrication: The Inconel 725 washer is easily shaped into the washer and thus experiences easy fabrication; this makes it easier to manufacture in ways that fit various applications.
  • Non-Magnetic: The physical characteristic of Inconel 725 washer is that it is nonmagnetic, ensuring its use in places where magnetic interferences are not permissible.
  • Versatile Applications: These washers are applied in several industries because of their high performance in harsh working conditions.

Therefore, Inconel 725 washers have several advantages, including excellent corrosion and oxidation qualities, high strength, as well as fatigue resistance.

Uses Of Inconel 725 Washers

Below are different uses of Inconel 725 washers in understanding their uses and value across different high-stress environments.

  • Oil and Gas Industry: Inconel 725 washers are applied to downhole tools and other equipment attached to, or exposed to, wellhead components, and extreme conditions of the drilling or extraction process.
  • Aerospace Sector: These washers are frequently used in aircraft engines, turbine parts, and structural sections that require high strength and temperature resistance.
  • Marine Engineering: Inconel 725 washers are well suited for marine applications, owing to their immunity to corroding in seawater and their high levels of mechanical strength.
  • Chemical Processing: These washers are deployed in all chemical plants in equipment and pipe structures that deal with corrosive substances for long-term effectiveness and safety.
  • Power Generation: Inconel 725 washers are used in nuclear and fossil Fuel Power plants for the application where materials are required to have high temperature and corrosive resistance.
  • Automotive Industry: These washers are applied in engines for high performance and racing because they can withstand heat and stress exerted on them.
  • Industrial Fasteners: Inconel 725 washer is applied as an element of bolting solutions in various industrial equipment and ensures precise and steady connection under a rather high working load.
  • Medical Devices: Due to its capability for biocompatibility and corrosion, the Inconel 725 washer is good for some medical devices and surgical instruments.
  • Cryogenic Applications: These washers can also retain their mechanical characteristics even at temperatures as low as those required for cryogenic applications such as in storage tanks.

Hence, by utilizing the features of Inconel 725 washers, industries can get the enhanced performance and durability of their applications.

Inconel 725 washers are specialist fasteners manufactured using a nickel-chromium washer that has high corrosion and strength characteristics. These washers do not degrade mechanically at high temperatures and can therefore withstand a range of applications.

Chemical Compositions Of Inconel 725 Washer

The chemical composition of Inconel 725 is crucial for comprehending its outstanding properties and suitability for various high-stress applications.

ElementsContent (%)
Nickel, Ni55 - 59
Chromium, Cr19 - 22.5
Iron, Fe9
Molybdenum, Mo7 - 9.50
Niobium, Nb (Columbium, Cb)2.75 - 4
Titanium, Ti1 - 1.70
Aluminum, Al 0.35
Manganese, Mn 0.35
Silicon, Si 0.20
Carbon, C 0.030
Phosphorous, P 0.015
Sulfur, S 0.010

Hence, The chemical composition of Inconel 725 washers highlights their robustness and versatility in challenging environments.

Mechanical Properties Of Inconel 725 Washer

The mechanical properties of Inconel 725 washers help in appreciating their performance capabilities and their suitability for high-stress applications.

PropertiesMetricImperial
Tensile strength855 MPa124000 psi
Yield strength (@0.2%)427 MPa62000 psi
Modulus of elasticity204 GPa29600 ksi
Poissons ratio0.310.31
Elongation at break57%57%
Hardness, Rockwell C55

Hence, The mechanical properties of Inconel 725 washers underscore their exceptional performance in challenging conditions.

Advantages of Inconel 725 Washer

Below are the qualities of Inconel 725 washers that may aid in understanding their value and choosing the appropriate material for a high-stress regime.

  • Superior Strength: These washers possess high tensile and yield strength to allow them to undertake large loads and stresses without experiencing deformation.
  • Excellent Fatigue Resistance: Inconel 725 washers are specifically manufactured for use under cyclic load carrying capacity and hence ideal for use where the product is likely to be subjected to cyclic loads.
  • Resistance to Stress-Corrosion Cracking: Stress corrosion cracking, which is an important consideration for reliability in high-stress environments, is well resisted by Inconel 725.
  • Thermal Stability: Inconel 725 washers are also resistant to various climates since they do not lose their mechanical properties even when exposed to high or low temperatures.
  • Oxidation Resistance: These washers do not corrode at high temperatures, thus being ideal where high temperatures are expected as per the application requirements.
  • Ease of Fabrication: The Inconel 725 washer is easily shaped into the washer and thus experiences easy fabrication; this makes it easier to manufacture in ways that fit various applications.
  • Non-Magnetic: The physical characteristic of Inconel 725 washer is that it is nonmagnetic, ensuring its use in places where magnetic interferences are not permissible.
  • Versatile Applications: These washers are applied in several industries because of their high performance in harsh working conditions.

Therefore, Inconel 725 washers have several advantages, including excellent corrosion and oxidation qualities, high strength, as well as fatigue resistance.

Uses Of Inconel 725 Washers

Below are different uses of Inconel 725 washers in understanding their uses and value across different high-stress environments.

  • Oil and Gas Industry: Inconel 725 washers are applied to downhole tools and other equipment attached to, or exposed to, wellhead components, and extreme conditions of the drilling or extraction process.
  • Aerospace Sector: These washers are frequently used in aircraft engines, turbine parts, and structural sections that require high strength and temperature resistance.
  • Marine Engineering: Inconel 725 washers are well suited for marine applications, owing to their immunity to corroding in seawater and their high levels of mechanical strength.
  • Chemical Processing: These washers are deployed in all chemical plants in equipment and pipe structures that deal with corrosive substances for long-term effectiveness and safety.
  • Power Generation: Inconel 725 washers are used in nuclear and fossil Fuel Power plants for the application where materials are required to have high temperature and corrosive resistance.
  • Automotive Industry: These washers are applied in engines for high performance and racing because they can withstand heat and stress exerted on them.
  • Industrial Fasteners: Inconel 725 washer is applied as an element of bolting solutions in various industrial equipment and ensures precise and steady connection under a rather high working load.
  • Medical Devices: Due to its capability for biocompatibility and corrosion, the Inconel 725 washer is good for some medical devices and surgical instruments.
  • Cryogenic Applications: These washers can also retain their mechanical characteristics even at temperatures as low as those required for cryogenic applications such as in storage tanks.

Hence, by utilizing the features of Inconel 725 washers, industries can get the enhanced performance and durability of their applications.

null

manifest alloys

mumbai - maharashtra - india

0 Year

View Profile

MANIFEST ALLOYS

manifest alloys

mumbai - maharashtra - india

0 Year

null

metcore steel & alloys

mumbai - maharashtra - india

2 Year

View Profile

Metcore Steel & Alloys

metcore steel & alloys

mumbai - maharashtra - india

2 Year

null

metal aims

mumbai - maharashtra - india

0 Year

View Profile

Metal Aims

metal aims

mumbai - maharashtra - india

0 Year

Inconel 725 Washer FAQ's  

The allowable operating temperature range for Inconel 725 washers is between -452°F to 1562°F (-269°C to 850°C).

Inconel 725 washers are highly resistant to oxidation, corrosion and wear and tear, making them suitable for use in most high-temperature applications. Additionally, they do not require any special surface treatments like galvanizing or painting in order to provide superior performance.

Standard Inconel 725 washers are produced as per industry specifications with predetermined sizes, shapes, threads, and thicknesses to meet specific application requirements. On the other hand, custom-made washers can be produced according to customer drawings with exact dimensions for unique applications.
null

bright metal overseas llp

mumbai - maharashtra - india

1 Year

View Profile

BRIGHT METAL OVERSEAS LLP

bright metal overseas llp

mumbai - maharashtra - india

1 Year

null

piyush steel

mumbai - maharashtra - india

2 Year

View Profile

PIYUSH STEEL

piyush steel

mumbai - maharashtra - india

2 Year

null

bhansali overseas

mumbai - maharashtra - india

2 Year

View Profile

Bhansali Overseas

bhansali overseas

mumbai - maharashtra - india

2 Year

null

sanghvi metal corporation

mumbai - maharashtra - india

2 Year

View Profile

SANGHVI METAL CORPORATION

sanghvi metal corporation

mumbai - maharashtra - india

2 Year

No more suppliers available.