Jayant impex pvt ltd

JAYANT IMPEX PRIVATE LIMITED belongs to well established industrial groups and are well qualified with good experience of dealing in below Steel Products of STANDARDS: ASTM, ASME, API, ANSI, BS, DIN, JIS, ISO. Our company is associated directly with many Indian Manufacturing units supplying various products. We are basically marketing their products directly as an exclusive agents. This is one of the reasons that we serve quality product with fastest possible delivery being most competitive. Our AIM is to satisfy the customer with quality & faster delivery service as per their requirement and thus have a lifelong association. Details of Each Product As Given Below:- FLANGES: Size: 1/2" (15mm) NB TO 60” (1500mm) NB NPS: 150# / 300# / 600# / 900# / 1500# / 2500# Type: Weld neck, Slip-On, Socket weld, Lap Joint, Threaded, Blind, Orifice, Long Weld Neck, Spectacle Blinds Face Type: Flat Face (FF), Raised Face (RF), Ring Type Joint (RTJ) Grades Available: CARBON STEEL: ASTM A 105, ASTM A 350 LF1, LF2 and LF3, API 5L GR. B, A333 GR 6, X42, X52, IS 1239, IS 3589 ALLOY STEEL: ASTM A519 4130/AISI 4130, AISI 4140, AISI 4340, ASTM A335 GR. P5, P9, P11, P22, P91, ASTM A213 T5,T9,T11,T12,T22,T91, ASTM A182 F5,F9,F11,F12,F22,F91, EN19, EN24 STAINLESS STEEL: ASTM A 182 F304/L, 316/L, 304H, 321/H, 347/H, 904L, ASTM A 182 F309, F310, F310s, F310H DUPLEX STEEL: UNS S31803, S32205, S32750, S32760, ASTM A694 F51, F52, F53, F54, F57, F59, F60, F61. OTHER STEELS: Cupro Nickel Alloys 70/30 – 90/10, 15-5Ph , 17-4Ph (AISI 630), Titanium grades 1 upto 11, Alloy 20 / WP20CB, Nickel 200 , 201 (UNS No. 02200 and UNS No. 02201), Alloy 400 (UNS No. 04400 - Monel), Alloy C276, B2, C4, G30 (UNS No. 01276, UNS No. 10665 - Hastelloy), Alloy 600, 625, 601, 718 (UNS No. 06600, UNS No. 06625 – Inconel), Alloy 800 H/T , 825 (UNS No. 08800, UNS No. 08825 - Incolloy) Flange Standards: ANSI : ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48 DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638, DIN2673 B.S: BS4504, BS4504, BS1560, BS10 PIPE FITTINGS: BUTT WELD & FORGED FITTING Type: Elbow, Tee, Cross, Reducer, Subtend, Pipe Caps, Union, Nipple, Outlet, Size: 15 mm NB up to 600 mm Seamless and 650mm – 1200mm ERW Grades Available: CARBON STEEL: ASTM A 105, ASTM A234 WPB ALLOY STEEL: ASTM A519 4130/AISI 4130, AISI 4140, AISI 4340, ASTM A335 GR. P5, P9, P11, P22, P91, ASTM A213 T5,T9,T11,T12,T22,T91, ASTM A182 F5,F9,F11,F12,F22,F91, EN19, EN24, A420 WPL6, ASTM A234 WP5,WP9,WP11,WP22,WP91 STAINLESS STEEL: ASTM A 182 F304/L, 316/L, 304H, 321/H, 347/H, 904L, ASTM A 182 F309, F310, F310s, F310H DUPLEX STEEL: UNS S31803, S32205, S32750, S32760, ASTM A694 F51, F52, F53, F54, F57, F59, F60, F61. OTHER STEELS: Cupro Nickel Alloys 70/30 – 90/10, 15-5Ph , 17-4Ph (AISI 630), Titanium grades 1 upto 11, Alloy 20 / WP20CB, Nickel 200 , 201 (UNS No. 02200 and UNS No. 02201), Alloy 400 (UNS No. 04400 - Monel), Alloy C276, B2, C4, G30 (UNS No. 01276, UNS No. 10665 - Hastelloy), Alloy 600, 625, 601, 718 (UNS No. 06600, UNS No. 06625 – Inconel), Alloy 800 H/T , 825 (UNS No. 08800, UNS No. 08825 - Incolloy) Rings: Size: Outer Diameter ranging from 25 mm to 2200 mm Finish: Black, Bright, Rolled & Forged As Spherodized Annealed or Hard(Quenched) & Tempered Condition Grades Available: CARBON STEEL: ASTM A 105, ASTM A 106 GR. A, B & C, ASTM A 350 LF1, LF2 and LF3, API 5L GR. B, A333 GR 6, X42, X52, IS 1239, IS 3589 ALLOY STEEL: ASTM A519 4130/AISI 4130, AISI 4140, AISI 4340, ASTM A335 GR. P5, P9, P11, P22, P91, ASTM A213 T5,T9,T11,T12,T22,T91, ASTM A182 F5,F9,F11,F12,F22,F91, EN19, EN24 STAINLESS STEEL: ASTM A 182 F304/L, 316/L, 304H, 321/H, 347/H, 904L, ASTM A 182 F309, F310, F310s, F310H DUPLEX STEEL: UNS S31803, S32205, S32750, S32760, ASTM A694 F51, F52, F53, F54, F57, F59, F60, F61. OTHER STEELS: Cupro Nickel Alloys 70/30 – 90/10, 15-5Ph , 17-4Ph (AISI 630), Titanium grades 1 upto 11, Alloy 20 / WP20CB, Nickel 200 , 201 (UNS No. 02200 and UNS No. 02201), Alloy 400 (UNS No. 04400 - Monel), Alloy C276, B2, C4, G30 (UNS No. 01276, UNS No. 10665 - Hastelloy), Alloy 600, 625, 601, 718 (UNS No. 06600, UNS No. 06625 – Inconel), Alloy 800 H/T , 825 (UNS No. 08800, UNS No. 08825 - Incolloy) BARS: Type: Round Bars, Flat Bars, Square Bars, Hexagonal Bars, Forged & Peeled Bars. Finish: Black, Bright, Rolled & Forged As Spherodized Annealed or Hard(Quenched) & Tempered Condition Size: 20mm - 600mm Grades Available: TOOL STEEL: H11, H13, DIN 1.2714, DIN 1.2343, DIN 1.2344, DIN 1.2379, SKD60, SKD61 CARBON STEEL: ASTM A 105, ASTM A 106 GR. A, B & C, ASTM A 350 LF1, LF2 and LF3, API 5L GR. B, A333 GR 6, X42, X52, IS 1239, IS 3589 ALLOY STEEL: ASTM A519 4130/AISI 4130, AISI 4140, AISI 4340, ASTM A335 GR. P5, P9, P11, P22, P91, ASTM A213 T5,T9,T11,T12,T22,T91, ASTM A182 F5,F9,F11,F12,F22,F91, EN19, EN24 STAINLESS STEEL: ASTM A 182 F304/L, 316/L, 304H, 321/H, 347/H, 904L, ASTM A 182 F309, F310, F310s, F310H DUPLEX STEEL: UNS S31803, S32205, S32750, S32760, ASTM A694 F51, F52, F53, F54, F57, F59, F60, F61. OTHER STEELS: Cupro Nickel Alloys 70/30 – 90/10, 15-5Ph , 17-4Ph (AISI 630), Titanium grades 1 upto 11, Alloy 20 / WP20CB, Nickel 200 , 201 (UNS No. 02200 and UNS No. 02201), Alloy 400 (UNS No. 04400 - Monel), Alloy C276, B2, C4, G30 (UNS No. 01276, UNS No. 10665 - Hastelloy), Alloy 600, 625, 601, 718 (UNS No. 06600, UNS No. 06625 – Inconel), Alloy 800 H/T , 825 (UNS No. 08800, UNS No. 08825 - Incolloy) PIPES: Size: 15 mm NB up to 1200 mm NB (Available as both Seamless and Welded) Schedule: 5S upto XXS Grades Available: CARBON STEEL: ASTM A 106 GR. A, B & C, ASTM A 350 LF1, LF2 and LF3, API 5L GR. B, A333 GR 6, X42, X52, IS 1239, IS 3589 ALLOY STEEL: ASTM A519 4130/AISI 4130, AISI 4140, AISI 4340, ASTM A335 GR. P5, P9, P11, P22, P91, ASTM A213 T5,T9,T11,T12,T22,T91, ASTM A182 F5,F9,F11,F12,F22,F91, EN19, EN24 STAINLESS STEEL: ASTM A 182 F304/L, 316/L, 304H, 321/H, 347/H, 904L, ASTM A 182 F309, F310, F310s, F310H DUPLEX STEEL: UNS S31803, S32205, S32750, S32760, ASTM A240 F51, F52, F53, F54, F57, F59, F60, F61, EN 1.4462, EN 1.4362, EN 1.4547 OTHER STEELS: Alloy 90Cu-10Ni, Alloy 70Cu-30Ni, UNS No. C70600 (Cu -Ni- 90/10), UNS No. C71500 (Cu -Ni- 70/30), Cupro Nickel Alloys 70/30 – 90/10, ISO CuNi10Fe1Mn, ISO CuNi30Fe1Mn, CEN CW352H, CEN CW354H, 15-5Ph , 17-4Ph (AISI 630), Titanium grades 1 upto 11, Alloy 20 / WP20CB, Nickel 200 , 201 (UNS No. 02200 and UNS No. 02201), Alloy 400 (UNS No. 04400 - Monel), Alloy C276, B2, C4, G30 (UNS No. 01276, UNS No. 10665 - Hastelloy), Alloy 600, 625, 601, 718 (UNS No. 06600, UNS No. 06625 – Inconel), Alloy 800 H/T , 825 (UNS No. 08800, UNS No. 08825 - Incolloy) We are leading Stock-Holder For 4130 Pipes