Get A Quote

bottomNavHome

Home

navProfile

Account

bottomNavGetAQuote

Get A Quote

About Us

  • Products

    drawerRightArrow
  • Materials

    drawerRightArrow

Contact Us

Connect with us

blackFacebook blackTwitter blackLinkedIn blackInstagram
Corten Steel SA423 GR1 APH Tubes

Corten Steel SA423 GR1 APH Tubes

Corten Steel SA423 GR1 APH Tubes resist sulfuric acid dew point degradation that metabolizes plain carbon steel at the cold end of an air preheater. Copper, chromium, nickel, and phosphorus form a thick oxide layer on the tube surface, which slows further metal loss. Boiler operators fit these tubes in which flue gas cools below the acid dew point, and plain carbon steel corrodes fastest.

The material follows ASTM A423/A423M, the specification for seamless and electrically welded low-alloy steel tubes used in pressure-containing parts such as economizers and in other services where resistance to corrosion matters. Grade 1 holds a minimum tensile strength of 415 MPa and a minimum yield strength of 255 MPa. Mills normalize the tubes before shipment, and buyers receive a mill test certificate with each lot.

Corten Steel SA423 Gr 1 APH Tube Price

Corten Steel SA423 Gr 1 APH Tube prices in India typically range from ₹85 to ₹125 per kg. Five inputs set the price of Corten Steel SA423 Gr 1 APH Tubes: outside diameter, wall thickness, manufacturing route, order tonnage, and delivery terms. Exact quotes vary by order quantity and specifications, so contacting suppliers directly is recommended for current pricing.

Seamless tubes cost more per tonne than electric resistance welded pipe because piercing and drawing take longer. Thin walls raise the rate too, since mills hold tighter dimensional control on them. Copper, chromium and nickel markets move the base rate, so every quotation includes a validity date. Bulk orders spread setup cost across a larger tonnage, while cut-to-length requests add a processing charge. Export shipments add freight, insurance, and third-party inspection fees on top of the ex-works rate. Quotations state the rate per kilogram or per tonne in INR or USD, which lets buyers compare offers on one basis.

Ask each supplier to quote against the same size list, certificate type, and delivery term. A quotation that omits third-party inspection or export packing looks cheaper on paper and adds cost later.

Corten Steel SA423 Gr 1 APH Tube Specifications

The specifications of A423 Gr 1 APH tube, including size range, standards, types, and more, are mentioned in the table given below.

 

Size Range

1/2 inch OD to 16 inch OD

Standards

AASTM A 423 / ASME SA 423

Grade

ASTM A423 GR 1 / ASME SA423 GR 1

Type

Round, Square, Rectangle, Hydraulic, Honed Tubes

Length

Single Random, Double Random & Custom Size

Type

Weathering Steel

End

Plain End, Beveled End, Threaded End

 

Corten Steel SA423 Gr 1 APH Tubes Chemical Composition

The chemistry below sets the weathering behaviour. Copper and phosphorus drive the protective rust layer, while chromium and nickel add toughness and resistance to acid condensate.

Element

A/SA 423 Gr 1

C, %

0.15 max.

Mn, %

0.55 max.

P, %

0.06-0.16

S, %

0.060 max.

Si, %

0.10 min.

Cu, %

0.20-0.60

Cr, %

0.24-1.31

Ni, %

0.20-0.70

 

SA 423 Gr 1 Mechanical Properties

The mechanical properties of Corten Steel A423 Gr 1 have been displayed in the table below.

Element

SA/A423 GR 1

Tensile Strength (MPa)

≥415

Yield Strength (MPa)

≥255

Elongation (%)

≥30

 

ASTM A423 Grade 1 APH Tube Dimensions and Sizes

ASTM A423/A423M covers tubes from 1/2 inch to 5 inches (12.7 mm to 127 mm) in outside diameter. Minimum wall thickness runs from 0.035 inch to 0.500 inch (0.9 mm to 12.7 mm). These tubes carry a minimum wall designation, so the wall doesn’t exceed the ordered value at any point on the tube.

Purchase order data for an air preheater task:

Parameter

Specification

Outside Diameter

12.7 mm to 127 mm

Minimum Wall Thickness

0.9 mm to 12.7 mm

Length

Straight lengths or cut lengths made to the preheater drawing

Ends

Plain end or bevelled end

Finish

Hot finished or cold finished

Dimensional tolerances follow ASTM A450/A450M. Specify the outside diameter, minimum wall, and cut length on the enquiry, and the mill confirms the tolerance band before production.

Types of Corten Steel SA423 Gr 1 Tubes

Buyers choose between two manufacturing routes.

  • Seamless SA423 Gr 1 Tubes
  • A423 Gr 1 ERW Tubes

Corten Steel SA423 Gr 1 APH Tube Standards

Five documents govern the material, testing, and certification:

Standard

Description

ASTM A423/A423M

Seamless and electrically welded low-alloy steel tubes

ASME SA423

Pressure code adoption of the same specification

ASTM A450/A450M

General requirements for carbon and low-alloy steel tubes

ASTM E213

Ultrasonic testing of metal pipe and tubing

ASTM E273

Ultrasonic examination of the weld zone of welded pipe and tubing

The ASTM A423 Gr 1 tube specification calls for tension, flattening, flaring, flange, hardness, reverse flattening, and hydrostatic tests. Inspectors expand and bend sample tubes to confirm they show no cracks or flaws once installed in a boiler.

Corten Steel SA423 Gr 1 APH Tube Applications

In thermal power plants, Corten Steel SA423 GR1 APH Tubes form the cold end layers of tubular air preheaters, where flue gas temperature falls toward the acid dew point.

Other service areas include:

  • Economizers in steam generating boilers
  • Flue gas heat recovery and waste heat units
  • Condensers and heat exchangers exposed to acid condensate
  • Fertilizer, cement and sugar plant boilers
  • Refinery and petrochemical process heaters

The temperature of the metal in the cold end tubes determines how quickly acid condensate forms, so designers place Grade 1 in the lowest temperature rows of the preheater. 

Buy Corten Steel SA423 Gr 1 APH Tubes from Verified Suppliers

Verify five points before placing an order with any supplier:

  • Mill test certificate showing heat number, chemistry, and mechanical results
  • Compliance with ASTM A423/A423M or ASME SA423, as the project requires
  • Third-party inspection access, with a named agency and test plan
  • Stock position and dispatch time for the required size and tonnage
  • Packing method for export, with end caps and moisture protection

Approved suppliers confirm stock position and dispatch time. Request a sample cut for chemical analysis and hardness checks on first orders, and keep the heat number on each bundle tag so the tube traces back to its certificate. Compare at least three offers on price, delivery time, and certificate type before submitting the order.

Send your size list and tonnage to receive a priced quotation.

 

Corten Steel SA423 GR1 APH Tubes resist sulfuric acid dew point degradation that metabolizes plain carbon steel at the cold end of an air preheater. Copper, chromium, nickel, and phosphorus form a thick oxide layer on the tube surface, which slows further metal loss. Boiler operators fit these tubes in which flue gas cools below the acid dew point, and plain carbon steel corrodes fastest.

The material follows ASTM A423/A423M, the specification for seamless and electrically welded low-alloy steel tubes used in pressure-containing parts such as economizers and in other services where resistance to corrosion matters. Grade 1 holds a minimum tensile strength of 415 MPa and a minimum yield strength of 255 MPa. Mills normalize the tubes before shipment, and buyers receive a mill test certificate with each lot.

Corten Steel SA423 Gr 1 APH Tube Price

Corten Steel SA423 Gr 1 APH Tube prices in India typically range from ₹85 to ₹125 per kg. Five inputs set the price of Corten Steel SA423 Gr 1 APH Tubes: outside diameter, wall thickness, manufacturing route, order tonnage, and delivery terms. Exact quotes vary by order quantity and specifications, so contacting suppliers directly is recommended for current pricing.

Seamless tubes cost more per tonne than electric resistance welded pipe because piercing and drawing take longer. Thin walls raise the rate too, since mills hold tighter dimensional control on them. Copper, chromium and nickel markets move the base rate, so every quotation includes a validity date. Bulk orders spread setup cost across a larger tonnage, while cut-to-length requests add a processing charge. Export shipments add freight, insurance, and third-party inspection fees on top of the ex-works rate. Quotations state the rate per kilogram or per tonne in INR or USD, which lets buyers compare offers on one basis.

Ask each supplier to quote against the same size list, certificate type, and delivery term. A quotation that omits third-party inspection or export packing looks cheaper on paper and adds cost later.

Corten Steel SA423 Gr 1 APH Tube Specifications

The specifications of A423 Gr 1 APH tube, including size range, standards, types, and more, are mentioned in the table given below.

 

Size Range

1/2 inch OD to 16 inch OD

Standards

AASTM A 423 / ASME SA 423

Grade

ASTM A423 GR 1 / ASME SA423 GR 1

Type

Round, Square, Rectangle, Hydraulic, Honed Tubes

Length

Single Random, Double Random & Custom Size

Type

Weathering Steel

End

Plain End, Beveled End, Threaded End

 

Corten Steel SA423 Gr 1 APH Tubes Chemical Composition

The chemistry below sets the weathering behaviour. Copper and phosphorus drive the protective rust layer, while chromium and nickel add toughness and resistance to acid condensate.

Element

A/SA 423 Gr 1

C, %

0.15 max.

Mn, %

0.55 max.

P, %

0.06-0.16

S, %

0.060 max.

Si, %

0.10 min.

Cu, %

0.20-0.60

Cr, %

0.24-1.31

Ni, %

0.20-0.70

 

SA 423 Gr 1 Mechanical Properties

The mechanical properties of Corten Steel A423 Gr 1 have been displayed in the table below.

Element

SA/A423 GR 1

Tensile Strength (MPa)

≥415

Yield Strength (MPa)

≥255

Elongation (%)

≥30

 

ASTM A423 Grade 1 APH Tube Dimensions and Sizes

ASTM A423/A423M covers tubes from 1/2 inch to 5 inches (12.7 mm to 127 mm) in outside diameter. Minimum wall thickness runs from 0.035 inch to 0.500 inch (0.9 mm to 12.7 mm). These tubes carry a minimum wall designation, so the wall doesn’t exceed the ordered value at any point on the tube.

Purchase order data for an air preheater task:

Parameter

Specification

Outside Diameter

12.7 mm to 127 mm

Minimum Wall Thickness

0.9 mm to 12.7 mm

Length

Straight lengths or cut lengths made to the preheater drawing

Ends

Plain end or bevelled end

Finish

Hot finished or cold finished

Dimensional tolerances follow ASTM A450/A450M. Specify the outside diameter, minimum wall, and cut length on the enquiry, and the mill confirms the tolerance band before production.

Types of Corten Steel SA423 Gr 1 Tubes

Buyers choose between two manufacturing routes.

  • Seamless SA423 Gr 1 Tubes
  • A423 Gr 1 ERW Tubes

Corten Steel SA423 Gr 1 APH Tube Standards

Five documents govern the material, testing, and certification:

Standard

Description

ASTM A423/A423M

Seamless and electrically welded low-alloy steel tubes

ASME SA423

Pressure code adoption of the same specification

ASTM A450/A450M

General requirements for carbon and low-alloy steel tubes

ASTM E213

Ultrasonic testing of metal pipe and tubing

ASTM E273

Ultrasonic examination of the weld zone of welded pipe and tubing

The ASTM A423 Gr 1 tube specification calls for tension, flattening, flaring, flange, hardness, reverse flattening, and hydrostatic tests. Inspectors expand and bend sample tubes to confirm they show no cracks or flaws once installed in a boiler.

Corten Steel SA423 Gr 1 APH Tube Applications

In thermal power plants, Corten Steel SA423 GR1 APH Tubes form the cold end layers of tubular air preheaters, where flue gas temperature falls toward the acid dew point.

Other service areas include:

  • Economizers in steam generating boilers
  • Flue gas heat recovery and waste heat units
  • Condensers and heat exchangers exposed to acid condensate
  • Fertilizer, cement and sugar plant boilers
  • Refinery and petrochemical process heaters

The temperature of the metal in the cold end tubes determines how quickly acid condensate forms, so designers place Grade 1 in the lowest temperature rows of the preheater. 

Buy Corten Steel SA423 Gr 1 APH Tubes from Verified Suppliers

Verify five points before placing an order with any supplier:

  • Mill test certificate showing heat number, chemistry, and mechanical results
  • Compliance with ASTM A423/A423M or ASME SA423, as the project requires
  • Third-party inspection access, with a named agency and test plan
  • Stock position and dispatch time for the required size and tonnage
  • Packing method for export, with end caps and moisture protection

Approved suppliers confirm stock position and dispatch time. Request a sample cut for chemical analysis and hardness checks on first orders, and keep the heat number on each bundle tag so the tube traces back to its certificate. Compare at least three offers on price, delivery time, and certificate type before submitting the order.

Send your size list and tonnage to receive a priced quotation.

 

Corten Steel SA423 GR1 APH Tubes Suppliers

Corten Steel SA423 GR1 APH Tubes FAQ's  

ASTM A423 Grade 1 is a low alloy steel tube grade with copper, chromium, nickel, and phosphorus additions that resist acid dew point and atmospheric corrosion. It has a 415 MPa minimum tensile strength and a 255 MPa minimum yield strength.

Air preheaters, economizers, flue gas heat recovery units, and condensers in power plants use them. All four expose the tube to sulfuric acid condensate.

Outside diameters run from 12.7 mm to 127 mm, and minimum wall thickness runs from 0.9 mm to 12.7 mm. Mills cut lengths to the drawing and supply plain or bevelled ends.

Yes. Stockists and manufacturers both quote this grade, so a buyer can collect three offers and compare them line by line on price, lead time, and certification.

Share the outside diameter, minimum wall thickness, length, quantity in tonnes, and destination port. Add the certificate type and any third-party inspection request, and the supplier will return a complete quotation.